Celina Solar Pros, Celina. Solar installation, repair, battery storage, and EV chargers, for Celina and nearby towns.

A solar system is not a box you pick by panel count alone. Two homes with the same roof can need very different systems when one uses far more power, when one roof faces south and the other faces east and west, or when one roof is shaded by a tall tree in the afternoon. In Celina, where summer sun is strong for months at a time and new homes are large, sizing the system to the real electric bill matters more than the brand on the panel. A system that is too small will barely move the bill. A system that is far too large will cost more than it can ever save.
This page explains how a proper solar installation works in Celina, what size means in plain words, what it typically costs, and what to check before you sign.
What a proper install includes
A full install starts with the bill and the roof. The installer reads a year of electric bills to find how much power the home really uses, then measures the roof, checks its age and condition, and maps the shade through the day. The panel layout is drawn to fit the roof, the inverter is placed, and the wiring route is planned. On install day, rails are fixed to the roof and sealed against leaks, panels are set and wired, the inverter is mounted, and the system is connected to the main panel. The system is then tested, the city inspection is passed, and the meter is swapped so the home can send extra power out to the grid. A written warranty for panels, inverter, and labor should be handed over before the crew leaves.
What size system do I need?
Size is measured in kilowatts, written kW. A Texas home uses about 1,100 kWh of power a month on average, and the average Texas system is about 13 kW. A smaller home with a low bill might need 6 kW, and a large two story home in Mustang Lakes or Light Farms with a high summer bill might need 10 kW or more. The right size comes from your own bill, not from a neighbor system. Ask the installer to show you the bill math and the size they chose. If two quotes give very different sizes with no bill check, ask why before you choose.
Panels, inverters, and batteries
Panels catch the sun and make DC power. Most home systems use standard panels on the roof. Panel brand matters less than the warranty and the installer who stands behind it.
Inverter turns DC power into AC power for the home. A string inverter serves the whole array, while microinverters sit under each panel and keep one shaded panel from dragging the rest down. Shaded roofs benefit from microinverters.
Battery stores extra daytime power for use at night and during an outage. A battery is optional. It adds cost and adds backup power, and it is covered on the battery storage page.
Solar installation cost in Celina
Typical ranges for a rooftop solar install in Celina, before incentives: 6 kW about $13,500; 8 kW about $18,000; 10 kW about $22,500; 13 kW about $30,000. The average installed price in Texas is about $2.25 per watt, and the average Texas system is about 13 kW. Typical ranges checked 2026-11-17. A site visit gives the exact price for your home.
What moves the price is size, roof, battery, and panel and inverter type. A straight install on a sound, unshaded roof sits at the lower end. A steep roof, a roof that needs work first, a battery, or microinverters sit higher. A quote far below these ranges should list exactly what is included, because the inverter, the permit, or the inspection may be missing. A solar install needs a city permit and an inspection, and the installer should handle that as part of the job.
Why Celina is a strong solar town
Celina is growing fast. Census estimates showed the city grew 24.6 percent between July 2024 and July 2025, the fastest rate among US cities of 20,000 or more, and most of that growth is new homes. New homes in Light Farms, Mustang Lakes, and Carter Ranch have large roofs and large electric bills, and North Texas sun is strong for most of the year. A south facing roof with no shade is the best case, but east and west roofs work well too, and a roof check will tell you plainly whether your roof is a good fit before you spend anything.
How panels are installed
Common questions
How much does solar installation cost in Celina, TX?
A typical rooftop solar install in Celina runs about $13,500 for 6 kW, about $18,000 for 8 kW, about $22,500 for 10 kW, and about $30,000 for 13 kW, before incentives. The average installed price in Texas is about $2.25 per watt. Typical ranges checked 2026-11-17. A site visit gives the exact price.
What size solar system do I need?
Size comes from your electric bill, not from a neighbor system. A Texas home uses about 1,100 kWh a month on average, and the average Texas system is about 13 kW. Ask the installer to show you the bill math and the size they chose.
How long does a solar install take?
The roof work on a standard home system usually takes a few days. The full job, including the city permit, inspection, and the meter swap, takes longer, and the installer should give you the schedule in writing before work starts.
Will solar work on my roof?
It depends on the roof age, pitch, direction, and shade. A south facing roof with no shade is the best case, and east and west roofs work well too. If the roof is old, replace it before the panels go on, because removing panels to re-roof costs extra. A roof check will tell you plainly whether your roof is a good fit.
Request a quote in Celina
Tell us what you need and a local pro will call you back. This is a demo form. Until this site is rented, messages go to the demo owner.